Construction Services

Speciñcations of building

Per Square Foot Cost -1350/-

 Foundation up to Plinth Level -

1. Foundation with M-20 grade concrete and TMT BAR

2. Depth 4’ from Ground level or as per sanctioned plan _{above 4’ will be charged extra} as per feet.

3. Plinth 2’ above from Road level or as per plan

4. 4” thick PCC (1:4:8)

Superstructure -

1. RCC structure with M -20 grade concrete and TMT BAR

2. Other floor height—as per sanctioned plan

3. 8" External brick works with cement sand mortar (1:6)

4. 4” Internal brick works with cement sand mortar (1:4)

5. 6 mm thick ceiling plaster (1:4)

6. 12 mm thick Internal plaster (1:6)

7. 15 mm thick External plaster (1:5)

Cement: ACCI JK Laxmi/ and available nearby market Steel : is available nearby TMTMake Hariom/speed/Ifi9 Bricks : 1st class Preferably &”x 4”x 4”(fly Ash)

Note: Concrete prade Mixture - M20 for all structural vv’ork.

DOOfS -

1. Sat wood door frames and factory made flush door With Both Side Synthetic ^Paint,

2. Toilet doors: Molded PVC type door With Frame.

Fixtures as following:- 

• lock with handle
• S.S. tower bolt
• 1 x door stopper
• 1 x rubber buffer

Windows -

^{Three Track aluminum sliding windows with color or tinted glass and M.S. grills}

Electrical -

1. Concealed electrical wiring through PVC conduit

2. All switches are Modular type

3. 8/10 way MCB for all circuits

4. Copper PVC insulated wires—Isl Marked

5. MCB As Per Circuit.

6. Number of electrical point as per contemporary standards

Other Areas: 1 calling bell point - at main door

Car parkingl roof / passage areas - 1X light points including gate light + 1 x 15A plug sockets

Sanitary and Plumbing -

1. Concealed U-PVC hot and cold water lines in all toilets - Make Prince/Water Flow.

2. PVC (Make Prince/Water Flow) medium pipes for external water lines

3. PVC 100 mm diameter rain water down pipe

4. C.P. fittings for all toilets in each flat.half turn or quarter turn.